How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

Foolishly removed the door seal thinking a screw was trapped.

Customer Question

Foolishly removed the door seal thinking a screw was trapped. The screw was actually inside the drum and I didn't need to remove the seal. This is a Zanussi ZWD14270W1 and it looks as if I need to remove the concrete block to get the seal back on. trying to strip down front of machine to get the seal back on. Removed top, removed soap tray. Removed screws and bolts holding front panel and strengthening bar but cannot seem to get front panel and strengthening bar off as seems to cables fouling free movement. HELP !
Submitted: 2 years ago.
Category: Appliance
Expert:  Daniel replied 2 years ago.
Hi Have you removed the door lock on the front panel?Have you remove the 3 screws at the very bottom of the front panel as well? Regards