How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1010
Experience:  Worked on appliances for more than 15 years
70193065
Type Your Appliance Question Here...
KevinWhiteJA is online now

Hotpoint Ultima model has worked perfectly than 6

Customer Question

Hotpoint Ultima model has worked perfectly for more than 6 years but, following replumbing with installation of new kitchen, it has stopped in mid-cycle (setting 6) showing fault F-05.
Please advise course of action
Submitted: 2 years ago.
Category: Appliance
Expert:  KevinWhiteJA replied 2 years ago.
Hi, welcome to Just answer... F05 error indicates that washer is unable to drain ... with the washer unplugged pull it out and check the drain hose, make sure there is nothing stuck... also check the drain filter located at the bottom front right after you have removed the plastic tirm ... clean the filter and make sure that impeller rotates freely ... if you do not find the filter then you have to remove the back and check the pump, also clean the black hose from the drump to pump ... this should solve the problem... if it does not then please get back with its complete model number