How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

I have a teka halogon hob. It is showing L. When i press

Resolved Question:

I have a teka halogon hob. It is showing L.
When i press and hold down the on button it shows ER3
What is ER 3 and how do i mend it ?
Submitted: 2 years ago.
Category: Appliance
Expert:  George-Allsorts replied 2 years ago.
Hello, my name is George..
The 'L' is indicating to you that the hob is in 'Locked' mode
The ER 03 indicates that "There is an object or liquid covering up the touch control".
Kindly be patient whilst awaiting any responses from me as I'm not constantly available.
Customer: replied 2 years ago.
The hob is clean of all liquids and matter.
The hob first comes up as L which i assume is childlock.
Then when attempting to unlock comes up E3
Please walk me through the unlock.
Customer: replied 2 years ago.
I have had to leave these premises now, but if you would kindly send me the walk through instructions later , then i will try again in the morning.
Expert:  George-Allsorts replied 2 years ago.
The instructions relating to touch-control usage/locking/unlocking are different depending on the model you have
I will need your Model..
Customer: replied 2 years ago.
The halogen hob is a teka TT 600
Expert:  George-Allsorts replied 2 years ago.
To unlock the control for use; touch sensor (on) to enable the touch control. Immediately touch the two sensors 'above and to the right' of the (on) simultaneously. The L will vanish from the display and an 0 appears with the lower point flashing and the hob will be ready to use for cooking.
George-Allsorts and other Appliance Specialists are ready to help you