How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16564
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

Hotpoint washer model wml560 no pump action.

Resolved Question:

hotpoint washer model wml560 no pump action.
Submitted: 2 years ago.
Category: Appliance
Expert:  Daniel replied 2 years ago.
Hi

Im afraid to say the main control board at the back at the bottom will have failed.

Ive seen this quite often were the pump and wires burn and it takes the control board out.
Remove the board at the back at the bottom and inspect it. You can usually see the tracking has blown on there.

You need to replace the main control board here im afraid. But remember to use a refurbished board if you can as new boards come blank and need to be programmed up with the hotpoint laptop top and if fitted blank you get the F09 error code.

Regards
Daniel and other Appliance Specialists are ready to help you