How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Plumberpro Your Own Question
Plumberpro
Plumberpro, Home Appliance Technician
Category: Appliance
Satisfied Customers: 634
Experience:  Heating and hot water heating appliances experienced
77408428
Type Your Appliance Question Here...
Plumberpro is online now

M ecotec 428 starts then stops 30 seconds or so later. No

Customer Question

M ecotec 428 starts then stops 30 seconds or so later. No fault codes but S7 if i press the info button. Seems to be heating the water but no central heating. Pump less than 1 year old, seems to be running. Any ideas?

Submitted: 1 year ago.
Category: Appliance
Expert:  Plumberpro replied 1 year ago.
Hi, it could be a flow issue, pump or air in pipes.as the pump is new ish , bleed vthe entire system , looking for manual air release. Valves on the pipework, especially around the cylinder cupboard and above the boiler . make sure rads are bled and the loft tank is full

Related Appliance Questions