How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 15960
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

Zanussi dishwasher zdf2020 stays on rinse cycle which happens

Resolved Question:

Zanussi dishwasher zdf2020 stays on rinse cycle which happens immediately the machine is turned on and before the detergent drawer opens and would continue on it for a whole day if not turned off
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.
Hi

What is it actually doing when you turn it on?
Is it washing all the time or pumping all the time?

If you press and hold the start button for a few seconds will it reset the control board.

Regards
Customer: replied 1 year ago.
Can't do anything now no electricity getting to machine it must have blown something was taking in water and pumping it out I think it was stuck on first rinse before detergent was released it was constantly taking in water and pumping it out and would never stop except now something else is gone as well
Expert:  Daniel replied 1 year ago.
Ok have you checked the fuse and power supply to the dishwasher?

If thats ok and its still filling and draining at the same time then its the control board im afraid. Thats the only thing that can cause this fault if thats what its doing.

But if the power supply is fine and theres power to the dishwasher then its possibley the control board at fault. If you are able to remove the outer door panel and then the plastic control panel.
From there you will see the control board, Check the wiring to it and see if theres any signs of burning on there as the wires can burn and cut the power out on the panel.

Check that and see what you find and let me know.

Regards
Daniel and other Appliance Specialists are ready to help you

Related Appliance Questions