How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16062
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

Michael I have a kenwood dishwasher that has recently

Customer Question

Hello Michael I have a kenwood dishwasher that has recently demonstrated poor performance - lots of food residue stuck on , even loose particles of food on glassware - any ideas? Cheers Andy
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.
Hi
Can you post the model number please.
Also does it seem to get hot during the wash?
Is this happening on both baskets?
Regards
Customer: replied 1 year ago.
Hello it's a Kdw60x13Yes it seems to heat up during the washI would say the problem is worse in the top basketCheersAndy
Expert:  Daniel replied 1 year ago.
Hi
Ok if its heating up and it seems to be worse on the top baskets then its possibley something to do with the spray arms.
Pull the top basket out and remove the spray arm under there and give this a good clean out. Make sure all the holes are clear as if any are blocked this actually stops the arm from spinning and spraying the water around.
Also look at the back when you push the top basket back the lower spray arm pushes into a support tube that runs up the back. Its usually a plastic nut it pushes into with a rubber washer in there. Check that nut and make sure the washer is still in there and not worn.
Try them and see what you find as its usually something to do with the spray arm when you get faults like this.
Regards