How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16357
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

We have an Amana fridge freezer. Model SRD522. The door handles

Customer Question

We have an Amana fridge freezer. Model SRD522. The door handles are "t bar" with 4 mountings and run the full height of the door. The fridge handle is loosening. How may the handle be tightened or removed and re-fixed?
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.
Hi
If you have the T bar handle then look at the small piece that's attached to the door that the handle presses against.
On the underside of each of them is a small hole.
In there is a grub screw. Its a small Alan key head.
Loose these on the small bars and then when loose enough you can remove them main handle from there.
Then you will see a screw in the centre of the small bracket attached to the door. Tighten them up but don't over tighten them as it can damage the screw hole on the door itself and then its a new door.
Once them brackets are tight refit the handle and tighten the Alan key screws up and that should be done.
Try that and see how it goes and let me know.
Regards
Customer: replied 1 year ago.
There are no Alan key grub screws. The entire door skin has to be removed to give access. We separately arranged for an engineer to atend to the job. Regards.