How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16543
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

Cannon Pro 60 C60DTX new element fitted still showing Error

Customer Question

Cannon Pro 60 C60DTX new element fitted still showing Error F1 and not heating
Submitted: 1 year ago.
Category: Appliance
Expert:  Daniel replied 1 year ago.
Hi
If you have F1 error code then theres only one thing that causes this and this is the control board.
F1 is a programming fault on the control board. In this case the min control board at the back is the fault and will need to be replaced.
Now you can pull it out and remove the back and check the wiring on there in case theres loose wiring blocks or burnt wires. But if that's all ok then its the control board at fault.
As in the service manual this states for F1 control board fault and to replace the control board.
Sorry its not good news but if you need anymore info just get back to me.
Regards
Expert:  Daniel replied 1 year ago.
Hi
Do you need anymore help on this as the question is still open.
If not then if you could remember to rate the answer that would be great.
Many thanks