How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

Zdt41 pic:91153904105. 3 years old Light come on when selecting

Customer Question

Zdt41 pic:91153904105. 3 years old
Light come on when selecting program but will not start
Submitted: 1 year ago.
Category: Appliance
Expert:  George-Allsorts replied 1 year ago.
If you try to select a different program, does the led select the other program?
Customer: replied 1 year ago.
Yes
Customer: replied 1 year ago.
It does switch on then nothing happens then after a while beebs
Expert:  George-Allsorts replied 1 year ago.
Thank you... Can you tell me how many times it beeps before pausing to restart?
Customer: replied 1 year ago.
3 times
Expert:  George-Allsorts replied 1 year ago.
Can you also hear the drain pump running?
Customer: replied 1 year ago.
No
Expert:  George-Allsorts replied 1 year ago.
Then there is either a problem with the pump, a problem with the switch for the float for the anti flood system, or a problem with the PCB. The three beeps infers water in the base and the anti-flood system has been activated. regards