How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3633
Experience:  Gas cooker specialist
46681511
Type Your Appliance Question Here...
Andrew Smith is online now

Danfoss fp715si programmer with baxi boiler does not turn off

Customer Question

danfoss fp715si programmer with baxi boiler does not turn off heating when programmer heat set to off. two green lights are on on boiler and one red light on programmer is on for hot water (required)
Submitted: 1 year ago.
Category: Appliance
Expert:  Plumberpro replied 1 year ago.
Hi , have you had any new parts fitted? Ie, room stat
Customer: replied 1 year ago.
The whole system was under the green screen last August. This is the first time I have wanted to turn off the heating. I have switched off the power which has put off the two green lights so presumably this means the system jaw shut down
Expert:  Plumberpro replied 1 year ago.
Not sure what green screen is.
Customer: replied 1 year ago.
Baxi has two green operating lights to show it is on
Customer: replied 1 year ago.
Sorry it should not have said screen. It is two lights
Customer: replied 1 year ago.
I am using text checker which makes its own mind up. Green screen should have read green scheme
Customer: replied 1 year ago.
I am concerned by your replies. Are you a plumber and or electricion
Customer: replied 1 year ago.
I am wasting time and money. This will now be terminated. Thank you. Regards. Barry
Expert:  Plumberpro replied 1 year ago.
Hi, it may have been wired up wrong, but usually when this happens the unit has developed a fault and needs replacing. If replaced by the same unit the wiring doesn't need to be changed. Sorry I can't be of more help than that.
Expert:  Plumberpro replied 1 year ago.
Hi, it may have been wired up wrong, but usually when this happens the unit has developed a fault and needs replacing. If replaced by the same unit the wiring doesn't need to be changed. Sorry I can't be of more help than that.
Expert:  Andrew Smith replied 1 year ago.
Do you have one or two motorised valves in the cylinder cupboard?