If you look on the back of the washer you will see a 10mm bolt towards the top in the middle.
Then theres another*****down one either side and it has the plastic bracket on it which is holding the hoses together.
Remove them 3 bolts and remove the plastic/rubber bungs as well which is in there.
Hope this helps. If you need anymore info just get back to me.
I see the question is still open. Is there anything else you need help on with the washer?
If not then if you could rate the answer i gave that will close the question.
I see the question is still open, Do you still need help on this?
If so just get back to me but if not then if you could rate the answer that would be great.