Appliance Repair Questions? Ask a Technician for Answers ASAP
Hi, welcome to Just answer ....how old is your dishwasher ? does the motor start when you close the door ?
________________________________________________________________________________________If you have further questions I will be pleased to assist you .. Please remember to RATE my answer Excellent or Good Service when you are satisfied....Thanks
OK please tell me its complete model number
Yes thanks for that ... if the door closes properly and water starts to fill but then it wont start the problem is with the motor that is bad and will need replacement... with the dishwasher unplugged you can pull it out and tilt it on its back by around 45 degrees to make sure all excess water drains off... after this is done clean the drain pump... now plug it back and try again, if the problem is still there you will have to replace the motor
OK then unplug it and try the procedure to clean the drain pump
OK can you simply remove the lower front plate and then clean the drain pump