How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JamesI Your Own Question
JamesI
JamesI, Handyman
Category: Appliance
Satisfied Customers: 1348
Experience:  I have repaired and maintained numerous items over the years, from fridges to freezers, radios to TV's.
75967336
Type Your Appliance Question Here...
JamesI is online now

Had a Haier Hw50-10FI delivered yesterday and installed. The

Resolved Question:

Had a Haier Hw50-10FI delivered yesterday and installed. The machine did the 1st wash and END LED was on but after trying to do another wash the machine did not respond at all.
Checked the fuse and water and all is ok
Submitted: 11 months ago.
Category: Appliance
Expert:  JamesI replied 11 months ago.

If you are confident the socket hasnt tripped, and the fuse in the plug hasnt blown this sounds like a control board failure.

They are very rare but unfortunately do happen, in this scenario the best thing to do is contact the retailer and get them to organise a hot swap.

Please let me know if I can be of any further assistance.

Regards

James

JamesI and 2 other Appliance Specialists are ready to help you

Related Appliance Questions