How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16355
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

I need to know which way the coloured wires go back on on

Resolved Question:

hello I need to know which way the coloured wires go back on on the push on/off button for a Beko dcu6130w tumble dryer?
Submitted: 11 months ago.
Category: Appliance
Expert:  Daniel replied 11 months ago.

Hi

What colour wires do you have?

Do you have

Brown,

Orange,

Red and yellow together

Orange and purple/yellow together?

Regards

Customer: replied 11 months ago.
Hi
There are four plugs for the wires to go on to, there is red and yellow taped together and brown and orange taped together.
I don't know which plugs they go to as I have already blown the fuse once!Many thanks
Expert:  Daniel replied 11 months ago.

Can you post a picture of the wires you have please.

Customer: replied 11 months ago.
My mistake there is 4 plugs
1- Brown
2- Orange
3- Red and yellow
4- Purple with yellow stripe and orangeThanks
Expert:  Daniel replied 11 months ago.

Thats great so it is the same as the service info i have. If you look at the switch you need to wire it up as follows.

Brown on one side and orange on the other.

The on the same side of the brown its the orange and purple/ yellow wire.

Then on the same side as the orange its the yellow and red

Does this make sense to you?

Customer: replied 11 months ago.
Ok does it matter left/right top/bottom
Thanks
Expert:  Daniel replied 11 months ago.

If you look at the switch there is a diverder down the center.

So basically you want the brown wire and the orange and purple/yellow on one side of the divered

And the orange and yello/ red wires on the other side of the diverder.

You can put the single wires towards the front of the switch and the doubles at the back.

Do that and before turning it on post a picture of the switch with the wires on and i will make sure its correct first.

Customer: replied 11 months ago.
I hope this is right
Expert:  Daniel replied 11 months ago.

Yep thats correct.

Turn it on and that will be back to normal from there.

Expert:  Daniel replied 11 months ago.

Hello are you still there?

Is the dryer sorted now or do you still need help on this?

Daniel and other Appliance Specialists are ready to help you
Customer: replied 11 months ago.
Hello sorry,The dryer is fixed! YAY thank you so much, will definitely recommend using this site.Thank you again