How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George-Allsorts Your Own Question
George-Allsorts
George-Allsorts, Senior Appliance Technicial Manager
Category: Appliance
Satisfied Customers: 1448
Experience:  A whitegoods technician with 30+ years service in Domestic Appliance Service & Repair, and General Mechanical & Electrical Repair
19471162
Type Your Appliance Question Here...
George-Allsorts is online now

We have an Indesit Washer /Dryer Machine IWDE 7168. We

Resolved Question:

We have an Indesit Washer /Dryer Machine IWDE 7168. We normally run it overnight on the cycle for wash / rinse/ spin / dry. For a second time this year we have had ongoing problem of cycle stopping with an F13 warning when wash is still damp. The first time the Engineer simply reprogrammed the machine which solved the problem for 3 months only. This time the Engineer has found the filter clogged and cleared it.
He has advised us not to use the full cycle in future but run wash cycle and dry cycles independantly. This takes away a key facility that was a main reason why we bought the machine. Is he right?
Submitted: 1 year ago.
Category: Appliance
Expert:  George-Allsorts replied 1 year ago.

Hello Brian,

I'm not going to spend a lot of time on this question as it is very low payment, however, the answer to your question is simply NO.

F13 is a fault in the system of the dryer, namely the NTC or the PCB that controls it.

Drying independently will not effect any change to the situation.

George-Allsorts and other Appliance Specialists are ready to help you