How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: Appliance
Satisfied Customers: 420
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your Appliance Question Here...
Rob is online now

Belling FSE60i induction hob. Front left was intermittent -

Customer Question

Belling FSE60i induction hob. Front left was intermittent - now does not come on -display shows underscored u . Now two others becoming intermittent - shows U on display.
We are using the same pans all the time.
Do I need new induction units and where can I buy them.
Paul
Submitted: 9 months ago.
Category: Appliance
Expert:  Dales-Electronic replied 9 months ago.

First thing to do is to switch the hob off at the wall - leave it off for ten minutes and then reconnect. This causes a full reset of all the electronics to take place.

Customer: replied 9 months ago.
Tried that its just the same. I forgot to mention that there is also a sound like water spitting under the pan, when its happening on one of the positions
Expert:  Dales-Electronic replied 9 months ago.

Any error codes - they begin with F followed by a number or letter.

Customer: replied 9 months ago.
The only display I have is the u- symbol as though there are no pans on the position
Expert:  Dales-Electronic replied 9 months ago.

OK you now need to take the hob out of the unit top and remove the top and have a look and see if you can see what is causing the spitting below.

Related Appliance Questions