How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16391
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

Our BEKO WME8227B will not start the cycle. The orange lit

Customer Question

Our BEKO WME8227B will not start the cycle. The orange lit screen doesn't display much when you switch cycles either. Sometimes its nothing and others its 0000
Submitted: 1 month ago.
Category: Appliance
Expert:  Daniel replied 1 month ago.

Hi

Try this and see what happens.

Turn the washer off.

Turn the dial to the cottons cycle.

Then press and hold the start button.

Keep that held in and turn the washer on.

After about 5 seconds let go and all the screen should be lit up.

Does it do this?

Then just turn it back off from there.

Customer: replied 1 month ago.
It pops up with E 10 the whole screen lights up
Customer: replied 1 month ago.
Are you able to assist?
Expert:  Daniel replied 1 month ago.

Sorry for the delay just had to pop out.

E10 is a door lock trica fault. Baiscally its a fault on the control board. As the board isnt lighting up fully during normal use and give you have the E10 error code then im afraid its all pointing to a faulty control board.

The control board will need to be replaced to cure this im afraid.