How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Your Own Question
Daniel
Daniel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16544
Experience:  20+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your Appliance Question Here...
Daniel is online now

My aeg lavamat turbo 16830 starts and then stops in a few

Resolved Question:

My aeg lavamat turbo 16830 starts and then stops in a few seconds, no error code and within the few seconds it seemed to do the right job. This happens to all the preset wahsing options.
Submitted: 27 days ago.
Category: Appliance
Expert:  Daniel replied 27 days ago.

Hi

Lets see what the error code is stored in there.

Set the washer going on a cycle and then press and hold the 2 buttons on the far left above each other.

Hold them both in and after a few seconds the error code should flash up E??

Let me know the code.

Regards

Customer: replied 27 days ago.
looks like E5
Expert:  Daniel replied 27 days ago.

Was there another number after the 5?

Customer: replied 27 days ago.
can't see properly
Customer: replied 27 days ago.
maybe E53
Customer: replied 27 days ago.
The third number was not displayed properly
Expert:  Daniel replied 27 days ago.

No worries, As the E50 error code family this is a fault with the motor side on these.

What you need to do is check the motor and at the back of it are the carbon brushes. Remove these and see if they have worn. If so then you need to replace these.

But if the carbon brushes are fine then im afraid its either the motor itself or the control board thats the fault here.

But check the brushes first and see what you find from there.

Customer: replied 27 days ago.
Thanks and have to do it tomorrow, it is outside in the shed. Is there a way to contact you tomorrow?
Expert:  Daniel replied 27 days ago.

No worries thats fine.

You will have an email with each reply i send. On there is a link which when you click it it will bring you back here.

Customer: replied 27 days ago.
Thanks
Expert:  Daniel replied 27 days ago.

Your welcome.

Daniel and other Appliance Specialists are ready to help you