How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Hill Your Own Question
Richard Hill
Richard Hill, Customer Service
Category: Appliance
Satisfied Customers: 503
Experience:  A good general knowledge of electronics, computers and telephony. I can usually get most things fixed.
14784508
Type Your Appliance Question Here...
Richard Hill is online now

Where does one purchase a13-2millimetre drill as stated in

Resolved Question:

Where does one purchase a13-2millimetre drill as stated in instructions for fitting new shock absorbers?
Submitted: 1 month ago.
Category: Appliance
Expert:  Richard Hill replied 1 month ago.

Hi,

When Bosch refer to 13-2 they are usually referring to an electric drill with a 13mm chuck and 2 speeds, could that be the case?

What's the exact instruction?

Best Regards,

Rich

Customer: replied 1 month ago.
It's just a picture with 13.2 pointing at the drill bit.I tested the bush against a 13mm Chuck and it will not enter.All this information I have got comes from genuine instructions with the shock absorbers from Bosch.
Expert:  Richard Hill replied 1 month ago.

Hi,

I tracked down the diagram you're referring to and yes, you have to drill out the old plug in spindle using a 13.2mm drill bit.

I've managed to find one on ebay (select 13.2mm from the drop down):

http://www.ebay.co.uk/itm/1pc-13mm-to-13-9mm-HSS-Reduced-Shank-Twist-Drill-Bit-Shank-Diameter-12-7mm-1-2-/301694937905

Hope that helps.

Best Regards,

Rich

Richard Hill and other Appliance Specialists are ready to help you