How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, BMW Technician
Category: BMW
Satisfied Customers: 4660
Experience:  Fully qualified 19+yrs exp/self employed technician in the UK
13210289
Type Your BMW Question Here...
Robert is online now

How much would it cost to replace a fan on a BMW Mini Cooper

Customer Question

How much would it cost to replace a fan on a BMW Mini Cooper s 2002
Submitted: 4 years ago.
Category: BMW
Expert:  Robert replied 4 years ago.

Hi..Sorry for delay..

 

Hopefully i can help..

 

Which fan are you refering too? the engine cooling fan.or in car heating fan.power steering fan?

Customer: replied 4 years ago.
Engine cooling fan
Expert:  Robert replied 4 years ago.

Hi..there thanks for getting back..

 

To replace the fan on these shouldnt generally take no more than hour and half max for anyone who done these before - it should be pretty straight forward for any garage to carry this out - unfortunatly i can't give specifics on labor price - as all garages tend to have their own set hourly rates aswell as where they aquire the replacement fan unit from which im sure you'll understand.but as a ball park figure i can see this being any more then £150 but again the best advice really is to get as many quotes to be honest and pick the best one from reputable garages locally.obviously BMW will be through the roof...so any good independant specialist should be able to aquire the parts cheaper wether it be from second hand dealer or specialist mini spares company some of which you should be able to find online/locally..the job does involve having to remove the front bumper / crash bar behind it /then the hoses to the radiator removed so coolant system will need refilled and bled again / then the radiator can be removed or pulled slightly forwards to get down the inner side of the rad to undo the clips holding the fan assembly against the radiator and lift out once the fan plug has been disconnected..obviously it will be reversal of removal of the parts removed aswell as mentioned above the coolant system refilled and bled.i do hope this helps...