How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Technician
Category: BMW
Satisfied Customers: 7115
Experience:  Automotive diagnostic tech
29331485
Type Your BMW Question Here...
Greg is online now

cant get the brake fluid to come out the back brakes pipes

Customer Question

cant get the brake fluid to come out the back brakes pipes on a bmw x5
Submitted: 3 years ago.
Category: BMW
Expert:  Greg replied 3 years ago.
Hi .

If brake fluid will not come out the rear brakes to bleed then you will need a scan tool to bleed the ABS system, and if this does not work then you will have to replace the ABS module.

But i don't think it will go this far i have seen this all the time you just need to connect the scan tool go into service function bleeding
ABS DSC3 hydraulics, you can pick to bleed just the front or rear .

This system has to be used after master cylinder is replaced .

Need further assistance then please get back to me.

My goal is to provide you with excellent service – if you feel you have gotten anything less, please reply back with the reply box below and not the poor or bad service button ,
For further assistance there is no extra charge after accepting.

Rgds Greg
Customer: replied 3 years ago.

hi Greg thank you for the reply . what is the scan tool???


 


george

Expert:  Greg replied 3 years ago.
Hi George .

An automotive scan tool (scanner) is an electronic tool used to interface with and diagnose and sometimes reprogram vehicle control modules.from Engine management to ABS,Airbag etc .

In your case you will need a top level dealership type scan tool to check for ABS codes and bleed the system .

Rgds Greg