Ask a Car Question, Get an Answer ASAP!
I'd first check all the high pressure hoses post turbo/s for any split hoses or cracked metal pipes, also check the ends of the intercooler as its not unheard of to pop the end caps off under high boost.
If this is OK then check the small vacuum lines to the turbo and its connected control solenoid on the bulkhead, any cracks or leaks can give turbo issues
Also have a feel around with your bare hands with the engine running to see if you can feel any escaping gas under your touch. Another method is to use a soap and water solution sprayed onto any suspect areas - if there's a leak it'll bubble up with the engine running
Also check that the vacuum hose running to the dump / turbo bypass valve is intact with no leaks as if the dump valve is opening prematurely you'll be losing all your boost
If this is OK then remove the high pressure intake hose after the turbo and have a feel of the turbine wheel - there should be no play radially at all - but a little bit of axial / end to end float is normal
one other possibility is that the wastegate actuator spring has gone soft so allowing the wastegate to open prematurely - if your actuator has a threaded end you can increase the preload on it to see if this improves things otherwise these units are quite cheap compared to a new turbo so it may be worth trying a replacement