How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert Your Own Question
Robert
Robert, UK Qualified Car Technician
Category: Car
Satisfied Customers: 4660
Experience:  Fully qualified / self employed garage technician in the UK
13210289
Type Your Car Question Here...
Robert is online now

Does anyone know how to remove the locking without a key

Customer Question

does anyone know how to remove the locking nut without a key
Submitted: 15 days ago.
Category: Car
Expert:  Robert replied 15 days ago.

Hi..there..

Either an old slightly under sized socket smacked on with a hammer over the locking nut and use an air impact gun to shock it free / depending on reach if the locking nut isnt inset into the wheel..you could weld a and an old nut on to the face of the locking nut and get it off that way...or you could try the Locking Wheel Nut Remover sockets which have a deep internal reverse thread most diy automotive places might stock these or have a look online such as ebay etc....the only other thing that would guarantee removal is find someone local with a Dynomec locking wheel nut removal set..i have that myself and can remove pretty much all types..its is an expensive kit so its worth asking around first..the AA and RAC usually carry these as standard...