How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Kelly Your Own Question
Mike Kelly
Mike Kelly, Mechanic
Category: Chrysler
Satisfied Customers: 33
Experience:  17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.
19374685
Type Your Chrysler Question Here...
Mike Kelly is online now

I have just purchased a voyager 2.5 crd 2006 model runs lovely,

Customer Question

I have just purchased a voyager 2.5 crd 2006 model runs lovely, The only issue i have is i seem to be having trouble when selecting 3rd sometimes it does not do it all the time, but when it does i go from 2nd to 3rd it then seems to drop out does the same going from 4th to 3rd. revs are about 2300 and around 25mph when its fine. anything out of that range it may play up any ideas
Submitted: 3 years ago.
Category: Chrysler
Expert:  Greg replied 3 years ago.
Hi .

i take it this is a manual 5 speed gearbox ..

Rgds Greg
Customer: replied 3 years ago.

yes its a 5 speed manual

Expert:  Greg replied 3 years ago.
Hi Daniel ..

To get this nright you have the following problem .

Selecting 3rd gear is hard and once in it may or will jump back out of gear ..

What is the actual mileage on this Voyager..

Rgds Greg
Customer: replied 3 years ago.

70000 miles but it has improved the more car is bring driven.

Expert:  Greg replied 3 years ago.
Hi Daniel .

Check and replace the transmission oil first and see if this improves the problem ..

You need 2.2L of ATF Dextron III..

Let me know the condition and colour of the fluid you drain off..



Drain plug on bottom of the trans ..



Fill plug fill up to the bottom threaded part of the fill plug so when it starts to flow slightly out the fill hole replace the plug ..

First try this then let me know if this helps or not for further assistance ..

Rgds Greg

Related Chrysler Questions