How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: Chrysler
Satisfied Customers: 21853
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Chrysler Question Here...
Matt is online now

Voyager seems to be in limp mode :-(

Customer Question

Voyager seems to be in limp mode :-(
Submitted: 1 year ago.
Category: Chrysler
Expert:  Matt replied 1 year ago.
Hello As there's no spark then check that there's power to the coil pack (at the other end of the plug lead) using a meter. If there’s 12V at the pack but no spark then check the ECU power supply (fuse and relay) and also the connections to the crankshaft speed sensor and back to the engine and down to the starter motor, and check the connection at this end as well I'd also check the condition of the engine earth connections the main one that runs between the engine and the battery earth and also the small wires that run out of the engine bay wiring loom and are secured to the engine with small bolts and ring terminals