How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Peter Zavarelli Your Own Question
Peter Zavarelli
Peter Zavarelli,
Category: Classic Car
Satisfied Customers: 29610
Experience:  Technical Consultant at Just Answer
14928985
Type Your Classic Car Question Here...
Peter Zavarelli is online now

I am building a classic replica car and have been supplied

Customer Question

I am building a classic replica car and have been supplied with a new tubular frame chassis but have been told a lot of the welds have not been finished properly. Can I have this corrected or do I need to get another new chassis made?
Submitted: 13 days ago.
Category: Classic Car
Expert:  Peter Zavarelli replied 11 days ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

You would need to have a body shop or repair facility look at the welds to see if they can finish or correct them to resolve this fault here.If they can be repaired then I would go this route.But if they cannot be repaired then you would need a new chassis made.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service,your 5 star rating is appreciated ( should be a link to click on here or above).You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete