How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Engineer
Category: Consumer Electronics
Satisfied Customers: 18606
Experience:  Over 16 years of experience in the Electronics and IT industries.
30970729
Type Your Consumer Electronics Question Here...
Pete is online now

Removal of a hinge from my Technics SL-J11OR-KEK turntable

Resolved Question:

Removal of a hinge from my Technics SL-J11OR-KEK turntable deck
Submitted: 1 year ago.
Category: Consumer Electronics
Expert:  Pete replied 1 year ago.
Hi Paul,To remove the hinge, put a screwdriver between the deck and the metal part.Move the screwdriver gently and loosen the hinge from the plastic.Then you should be able to slide the metal part upwards to release it from the deck.Pete.
Expert:  Pete replied 1 year ago.
Hi Paul, just checking in on your question. How did things turn out for you?
Customer: replied 1 year ago.
Thanks, Pete................you're a star !
I'll try this tomorrow.
Paul V.
Expert:  Pete replied 1 year ago.
You are welcome, Paul :)
Customer: replied 1 year ago.
Steve,
I read your instructions and I tried removal of my hinge from my Technics deck and it was a complete success !
Thanks for your help,
Paul V.
Expert:  Pete replied 1 year ago.
Don't forget to rate my help, it is how the site rewards me for my time... :)Pete.
Pete and other Consumer Electronics Specialists are ready to help you
Customer: replied 1 year ago.
Regarding my Technics hinge, with your precise and clealy worded, its easy to do. So, 10 /10, but as its Easter,10.5 / 10 !!
Regards, *****