How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eng. Andres Your Own Question
Eng. Andres
Eng. Andres, Engineer
Category: Electronics
Satisfied Customers: 68
Experience:  Electronic Eng. Electronics Specialist. Circuit designer
54002000
Type Your Electronics Question Here...
Eng. Andres is online now

I have just fitted HGR 2488 VGA Conversion kit to my 2488 mk

Customer Question

I have just fitted HGR 2488 VGA Conversion kit to my 2488 mk 1 recorder. It all well well until I switched it back on, now all I get is "ERROR CODE 1"    Forgot to mention this equip. is "Tascam" made by Teac, sorry.

Submitted: 4 years ago.
Category: Electronics
Expert:  Michael Hannigan replied 4 years ago.
Hello. My name is Michae. I can help you with your question.

I don't think you are in danger of causing permanent damage. Can you please press and hold the exit key for a few seconds and then let me know if the same error returns?

Mike
Customer: replied 4 years ago.

Thanks for reply, but this has no effect at all. Still shows "system error code 01".

Customer: replied 4 years ago.


Tascam 2488 mki problem: I have removed offending module (hgr 2488) & my recorder still shows the same fault (system error, code 01). Looks like I've damaged the recorder.!

Customer: replied 4 years ago.

Tascam 2488 problem: Hi, I'm afraid it's taking too long to get an answer to this, so I am just putting it into my local shop for repair. "press & hold exit button" being the only suggestion so far received, I'm afraid it's not satisfactory for my needs, I need this machine up & running. It's a pity you could'nt help at all, but it is pretty specialised equipt. A. Murray.