How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask *ElectronicsTech Your Own Question
*ElectronicsTech
*ElectronicsTech, Customer Service
Category: Electronics
Satisfied Customers: 9705
Experience:  I have over 15 years experience as an electronics repair and troubleshooting technician.
62741268
Type Your Electronics Question Here...
*ElectronicsTech is online now

pls can u explain where and how to activate the pre fade listen

Resolved Question:

pls can u explain where and how to activate the pre fade listen switch on dm 24 as cannot hear thru head phones to bring in track when fader is on low thanku
Submitted: 3 years ago.
Category: Electronics
Expert:  *ElectronicsTech replied 3 years ago.

Hi,
my name is***** will assist you.
PLEASE CLICK HERE FOR THE TASCAM DM-24 Reference Manual Owners MANUAL

When you press the PFL button, the main monitor output will stop monitoring anything else and the only audio will be the selected PFL channel(s). This does not affect the main output mix — just the sound you hear on the monitor bus. Note that all selected PFL channels will be monitored, so you can press as many PFL buttons as you like.

PFL also takes over the mixer's VU meters.

PFL is useful when setting the initial input gain of a channel, as it reflects the pre-fade level.

PFL vs Solo

PFL is similar to the solo button. There are two differences:

  1. PFL is pre-fader, solo is post-fader (i.e. the fader affects the solo level).
  2. PFL does not affect the master output but soloing a channel may do so (depending on the mixer)

graphic



Please let me know if you need any other assistance.
Please take a moment to rate my service positively.
Thank you very much!

Customer: replied 3 years ago.

hi im sorry but i dont think this helps as the picture is not of a tascam dm 24 plus i cannot see a pfl button on the mixer ,hence my problem

Expert:  *ElectronicsTech replied 3 years ago.

Is this your mixer>
If yes, then use the control panel>
The PFL Function is in the solo mode.


PLEASE CLICK HERE FOR THE TASCAM DM-24 Reference Manual Owners MANUAL

*ElectronicsTech and 2 other Electronics Specialists are ready to help you

Related Electronics Questions