How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eng. Andres Your Own Question
Eng. Andres
Eng. Andres, Engineer
Category: Electronics
Satisfied Customers: 68
Experience:  Electronic Eng. Electronics Specialist. Circuit designer
54002000
Type Your Electronics Question Here...
Eng. Andres is online now

why does my tascamcc-222slmk2 play through one speaker only

Customer Question

why does my tascamcc-222slmk2 play through one speaker only when playing a cd
Submitted: 3 years ago.
Category: Electronics
Expert:  Aric replied 3 years ago.
Hello and sorry to hear you're having problems. What is the device that the Tascam is connected to, is it a Mixer, receiver, amplifier, or powered speakers?

Are you using both stereo left and right outputs of the Tascam to input said device?

If so, if you swap the left and right cables around (so that left is in right and right is in left), does the issue follow the Tascam channel, or the speaker?
Customer: replied 3 years ago.

The amps I have tried are a new marantz and a pionneer676 ,both


in perfect working order.Also tried numerous different ways of connecting


 


amps to the tascam ,all without succes .dont know what to do next.


 


I hope you can advise


 


Thank You

Expert:  Aric replied 3 years ago.
Okay, if you swap the output cables on the Tascam from left to right, does the channel that's out follow the output on the Tascam, or the cable?
Customer: replied 3 years ago.

The amplifiers I have tried are Marantz PM6005 and a Pioneer 676.


Both these units are in perfect working order. I have tried numerous


ways to connect the Tascan to each of these amplifiers without


success. The speakers are Tannoy also in perfect working order.


Hope this is enough information and you can help.


Thankyou.

Expert:  Aric replied 3 years ago.
You didn't reply back to the info request.

If you swap the output cables on the Tascam from left to right, does the channel that's out follow the output on the Tascam, or the cable?