How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask *ElectronicsTech Your Own Question
*ElectronicsTech
*ElectronicsTech, Customer Service
Category: Electronics
Satisfied Customers: 9907
Experience:  I have over 15 years experience as an electronics repair and troubleshooting technician.
62741268
Type Your Electronics Question Here...
*ElectronicsTech is online now

I have an ECHOSTAR AD-3000 IP Viaccess. On first starting after

Customer Question

I have an ECHOSTAR AD-3000 IP Viaccess. On first starting after going to the factory reset when trying ti set the east and west limits I get motor error. What could the problem be.
Submitted: 3 years ago.
Category: Electronics
Expert:  *ElectronicsTech replied 3 years ago.
Hi, my name is***** will assist you. Try this please>
Go in to the “ Motorized dish setting ”menu with the key to “Erase Position Data” and press the OK key. Then go to
“ Erase All Satellite Data ” press the red key twice
. Press the MENU key, go to Installation, Motorized Dish Setting, Antenna Installation, press the
OK key and proceed from start. Then try again.