Ask an Electronics Question, Get an Answer ASAP!
I have a kguard NS801 and a TP-Link WD8980 router in my own network I can use kguard apps and webserver to view the DVR.
I have port forwarded, all 3 ports and are open port 80 was , changed to 8080, the other ports are 9000 and 18004 when I log in with my external ip I get my router webserver it is on port 80 I tried the Kguard DDNS login I set up and it cant connect either it. it just takes me to the Router login. the router port forward is set using the DVR IP address the DVR is static and the gateway is that of the router. any ideas
Client port 9000
IP address 192.168.1.110
router port forward settings
I was nearly there
got the DVR emailer going the DDNS responded
all the ports were open
within network could see DVR screens
still no dvr video
dish washer tripped RCD and router locked up had to reset it. reloaded the backup config for the router. Now all ports closed, no emailer, no DDNS
can still access dvr within own network
External IP is now 220.127.116.11