How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask *ElectronicsTech Your Own Question
*ElectronicsTech
*ElectronicsTech, Customer Service
Category: Electronics
Satisfied Customers: 9797
Experience:  I have over 15 years experience as an electronics repair and troubleshooting technician.
62741268
Type Your Electronics Question Here...
*ElectronicsTech is online now

Sky remote code -48CX350B

Customer Question

Sky remote code for TX-48CX350B
Submitted: 1 year ago.
Category: Electronics
Expert:  *ElectronicsTech replied 1 year ago.
follow these instructions:Press tv on your Sky remote, then hold down select and the red button until the red light at the top of the remote flashed twice.Enter 1664 code then press select. If that fails try these next please 0678, 2505.If those do not work let me know the version of your Sky remote please. To find out which version of the Sky remote control you have, open the battery cover on the back of yourremote control. Look for a sticker (either on the battery cover or in the battery compartment) that includes the text 'Sky rev' (or Sky+ rev or SkyHD rev), followed by a number, such as 4.
Customer: replied 1 year ago.
SkyHD rev 9f
Expert:  *ElectronicsTech replied 1 year ago.
Okay, thank you. Try the codes and procedure from the image links below please.
Customer: replied 1 year ago.
No codes recognised by red light flashing twice. No ok button on sky remote do you mean select
Expert:  *ElectronicsTech replied 1 year ago.
. Try the steps with the codes please.Cover the front of your Sky remote, or point it away from the TV.2. Press the TV button.3. Now point your Sky remote control at the TV.4. Hold down the Select and Red buttons together for a few seconds.After a few seconds of holding down the buttons, the light at the top of your Sky remote should flash twice.5. Now enter your four-digit remote control code.As you press each number button, the light at the top of your Sky remote will flash once. As soon as the fourth digit is entered, the light should flash twice more. If it does not work let Miu know if these lights flash correctly please. 6. Press the Select button.7. Cover the front of your Sky remote again, or point it away from the TV.8. Press the Sky button.9. Point your Sky remote control at the TV again.
Expert:  *ElectronicsTech replied 1 year ago.
Did that work for you or do you need more help?