How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask *ElectronicsTech Your Own Question
*ElectronicsTech
*ElectronicsTech, Customer Service
Category: Electronics
Satisfied Customers: 9705
Experience:  I have over 15 years experience as an electronics repair and troubleshooting technician.
62741268
Type Your Electronics Question Here...
*ElectronicsTech is online now

I have a Toshiba TV 22D1334B as a second set and until I connected

Customer Question

I have a Toshiba TV 22D1334B as a second set and until I connected a Daewoo recorder was able to receive my Sky television, the set being connected to an analogue channel,( I think either 41 or 42). I have disconnected the recorder now but can still not receive my Sky television.
I have tried to retune but cannot find anywhere that gives the choice of tuning to analogue. Can you help.
Thank you ***** *****
Submitted: 1 year ago.
Category: Electronics
Expert:  *ElectronicsTech replied 1 year ago.
Try these steps please...Press the INPUT button on the remote control repeatedly untilANT/CABLE is selected.Press the MENU button on the remote control.Using the Arrow buttons, select the icon in the top menu associated with SETUP, this is the icon furthest on the Right that looks like a gear.Use the arrow buttons to select and highlight INSTALLATIONand press ENTER.Select the icon in the top menu associated with TERRESTRIAL, this is the icon furthest on the Left that looks like an antenna.Select and highlight INPUT CONFIGURATION and press ENTER.Using the left/right arrow buttons, select Antenna or Cable as desired, then select DONE.Press the CH RTN button to go back to the TERRESTRIALmenu.Select CHANNEL PROGRAM and press ENTER.Select START SCAN to begin the Channel Program. Progress will be shown on the screen.Once complete the TV will display the lowest scanned and identified channel. OPTION 2 The Option 2 procedure is for TVs with menus similar to the one shown below. Press the INPUT button on the remote control repeatedly untilANT/CABLE is selected.Press the MENU button on the remote control.Using the Arrow buttons, select SETTINGS.Use the arrow buttons to select SETUP from the upper items and press ENTER.Select ANT/CABLE.Using the left/right arrow buttons, select Antenna or Cable as desired.Next select AUTO TUNING and press ENTER.Select START SCAN to begin the Auto Tuning. Progress will be shown on the screen.Once complete the TV will display the lowest scanned and identified channel.
Customer: replied 1 year ago.
Thank you I already worked it out for myself, after leaving the message.
Expert:  *ElectronicsTech replied 1 year ago.
Thats great! I am glad to hear that you got itt working.