Ask an Electronics Question, Get an Answer ASAP!
Hi Jason. Welcome to justanswer.
Press and hold the PROG (up and down) buttons on the front panel of the Recorder for more than 5 seconds with no disc in the unit. All the settings will revert to factory reset.
Reply if further assistance is required.
Okay. Ensure there's no disc in the device.
Press "Menu" on the remote control to open the on-screen menu.
Do you find Setup in the list?
Enter setup and you will find factory reset. Press Enter
Highlight "Factory Settings" and then press "Enter."
Highlight "Start" and then press "Enter" when a message appears warning you that continuing will reset the Samsung DVD Recorder to its default factory settings. A progress bar appears on the screen, displaying the status of the factory reset.
Press "Enter" when a message appears on the screen stating that the factory reset is finished.
Is there an option of factory reset in the system?
In the front panel of the recorder, do you see two buttons (up/down) for PROG?
Yes go back. The prog buttons that i told you to press initially, you pressed them on remote or from the front panel of the dvd player?
Again press them for about 10 seconds.
You want to turn off progressive scan mode?
Press the P.Scan mode button from the front of the recorder
Make sure your device is in stop mode
"Press yes to confirm Interlace scan mode otherwise press no" Is this message displayed on the screen?
Press the stop button on the remote control
Now press the button P.Scan. Do you get a message on the screen?
"Press yes to confirm Interlace scan mode otherwise press no". This message should be displayed.
Press 1 and check if you get this
Again press the p scan button
What did you get on the screen?
Press it three times and see if the PSO indicator on the front goes off or not.
Have you connected any HDMI cable to the dvd player?
Progressive scan gets automatically activated when HDMI is connected.
Check first by pressing the p.scan button
Do you have the manual?
Ok I am providing you the manual. Check page 18 and follow the step if you want to setup using scart.
CLICK HERE FOR THE MANUAL.
Done with setting up the dvd?
Hi Jason, just checking in. How did things turn out?