How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Engineer
Category: Electronics
Satisfied Customers: 17292
Experience:  Over 16 years of experience in the Electronics and IT industries.
30970729
Type Your Electronics Question Here...
Pete is online now

CLP 560

Resolved Question:

CLP 560
Submitted: 10 months ago.
Category: Electronics
Expert:  Pete replied 10 months ago.

Hi Jo,

If the voltages are good, have you checked if the switch is working by testing it for continuity?

If the switch has failed, it will need to be replaced.

--------------------

Kindly rate my service 5 stars at the top of your question page if my answer helped so I am rewarded for my time; tips appreciated :)

You can always reply back at any time if you need further assistance.

Pete.

--------------------

Pete and other Electronics Specialists are ready to help you
Customer: replied 10 months ago.
For sure the switch is ok as i Checked the voltages after switching on and after the power supply
Customer: replied 10 months ago.
i have 5volts if i disconnect te connector linked to teh main board DM. When i plug the connector (12 pins ?), the voltgae drops to 4,75V, not enough for the Processeur and IC for signal treatment
Customer: replied 10 months ago.
I cannot at all have the voltages if ther is no continuity on the switch ? I don't understand your answer
Customer: replied 10 months ago.
your answer didn't help me at all
Customer: replied 10 months ago.
now, i have been fooled of 14£ for nothing ? I will publish your response to facebook just for funf the voltages are good, have you checked if the switch is working by testing it for continuity? If the switch has failed, it will need to be replaced.How coud all votages be good if the switch failed ? are you sure you are a technician ?
Expert:  Pete replied 10 months ago.

It depends where you are taking the voltage readings.

You said when you switch on, nothing happens. So where does the voltage drop happen?

Customer: replied 10 months ago.
The 5voltage drops to 4,75 when i connect the DM bord (connector CN2)
Customer: replied 10 months ago.
thanks for not helping at all and make just pay

Related Electronics Questions