How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: Ford
Satisfied Customers: 197
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Ford Question Here...
Matt is online now

hi ford focus 1.8 tdci 118 wont run code comes up po110

Customer Question

hi ford focus 1.8 tdci 118 wont run code comes up po110
Submitted: 4 years ago.
Category: Ford
Expert:  Greg replied 4 years ago.
Hi .

Thank you for using justanswer ,and i will do my best to help you with this issue .

The code P0110 is your air intake sensor ,which is located on the airfilter box on the air intake duct to the throttle body .in some cases when a service is carried out and the filter replaced the sensor could of been forgotten to be reconnected ,so check this first .

This will normally not start you from stating or running the car ,you may have a loss of power ,

Was any work done on the car ?

Rgds Greg

Related Ford Questions