How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Gallagher99 Your Own Question

Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 2982
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

ford focus 100 2009 1.6 zetec petrol manual. when the car

Customer Question

ford focus 100 2009 1.6 zetec petrol manual. when the car has been stationary with the hand brake on and ignition off for even a short period of time, when i start up and drive off after a short time, it could be a few seconds after pulling away or as long as 20 seconds, It only happens once and only lasts about 1 second, i get a scraping noise from what seems to be the front offside area of the car.
Submitted: 3 years ago.
Category: Ford
Expert:  Gallagher99 replied 3 years ago.
Hi there ,good evening to you

Ok I suspect the noise you are hearing is the ESP /ABS pump completing it's self test
This noise happens around 10.5 mph and only happens once after start up
It can be described as a metallic ping type noise
This actually comes from the passenger side bulkhead area
This noise is a normal operation of the vehicles esp system



If you need anymore help or advice on this issue please let me know 
If you are completley satisfied with my answer /advice 
PLEASE RATE MY ANSWER 
Kind regards in advance and have a nice evening 


Brian
Customer: replied 3 years ago.

Thanks for the speedy response. That would make sense i suppose. Never had car with eps before.its new territory. Thanks for your help. John

Expert:  Gallagher99 replied 3 years ago.
Hi there John ,good morning to you

Now worries glad I could be of help
If you ever need any future help or technical advice regarding your vehicle please let me know
I hope my advice /answer has put your mind at ease

If you need anymore help or advice on this issue please let me know 
If you are completley satisfied with my answer /advice 
PLEASE RATE MY ANSWER 
Kind regards in advance and have a nice day


Brian

What Customers are Saying:

 
 
 
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil
< Previous | Next >
  • 9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much. Phil
  • Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible. Charles
  • As a single woman, I really appreciate an excellent and affordable opinion.
    Thank you Geordie, I will not hesitate to contact justanswer in the future!
    Sue
  • Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff. Jim
  • I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry. Stephanie P
  • Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help. Mary C.
  • This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!! Alex
 
 
 

Meet The Experts:

 
 
 
  • Matt

    Matt

    Mechanical Engineer

    Satisfied Customers:

    177
    BEng hons Mech engineering, in auto industry 22 years
< Last | Next >
  • http://ww2.justanswer.com/uploads/35/350matt/2012-6-7_182356_matsavatr.64x64.jpg Matt's Avatar

    Matt

    Mechanical Engineer

    Satisfied Customers:

    177
    BEng hons Mech engineering, in auto industry 22 years
  • http://ww2.justanswer.com/uploads/MI/mikeamechanic/2013-4-2_175558_photo.64x64.JPG Mike Kelly's Avatar

    Mike Kelly

    Ford Mechanic

    Satisfied Customers:

    140
    17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.
  • http://ww2.justanswer.com/uploads/FO/fordspec/DSC00877.64x64.JPG fordspec's Avatar

    fordspec

    Ford Technician

    Satisfied Customers:

    11
    ford technician
  • http://ww2.justanswer.com/uploads/AL/allagher/2015-6-23_213635_image.64x64.jpg Gallagher99's Avatar

    Gallagher99

    Senior Vehicle Technician

    Satisfied Customers:

    545
    SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
  • http://ww2.justanswer.com/uploads/FO/fordtwo/2014-12-19_163422_arrepair.64x64.jpg Robert's Avatar

    Robert

    Ford Technician

    Satisfied Customers:

    40
    Fully qualified 19+yrs exp/self employed technician in the UK
  • /img/opt/shirt.png Mark's Avatar

    Mark

    Auto Service Technician

    Satisfied Customers:

    59
    Qualified City & Guilds
 
 
 

Related Ford Questions