How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Kelly Your Own Question
Mike Kelly
Mike Kelly, Ford Mechanic
Category: Ford
Satisfied Customers: 5470
Experience:  17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.
19374685
Type Your Ford Question Here...
Mike Kelly is online now

ford transit 57 plate suddenly stopped and wont start engine

Customer Question

ford transit 57 plate suddenly stopped and wont start engine malfunction has come up on dashfollowing codes detected
Po68A
ECM /PCM POWER RELAY DEENERGISED-TO EARLYNOT CURRENT DTC
P2135 THROTTLE /PEDAL POSITION SENSOR /SWITCH A/B/VOLTAGECORRELATION SIGNAL PLAUSABILITY FAILURE
P2265 WATER IN FUEL SENSOR CIRCUIT RANGE/PERFORMANCE
HAVE CHANGED FUEL FILTER AND TRIED TO CLEAR FAULT CODES BUT THEY COME BACK IMMEDIATLY
Submitted: 3 years ago.
Category: Ford
Expert:  Shantal-Mod replied 3 years ago.

Hello,

I've been working hard to find a Professional to assist you with your question, but sometimes finding the right Professional can take a little longer than expected.

I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you.

Thank you,

Shantal

Expert:  Mike Kelly replied 3 years ago.


Hello, welcome. My name is Mike, I will do my very best to
assist you with your question.

From what you are describing this is a a ecu issue,the ecu is not communicating with the vehicle properly and will need to be updated or reset.I am also a warranty inspector and have inspected this issue before.