How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Mechanical Engineer
Category: Ford
Satisfied Customers: 207
Experience:  BEng hons Mech engineering, in auto industry 22 years
12772297
Type Your Ford Question Here...
Matt is online now

ford focus 2.0 tdci 136bhp changed cam belt engine ran fine

Customer Question

ford focus 2.0 tdci 136bhp changed cam belt engine ran fine let it warm up 1/2 hour changed the oil ran for about 5 min then cut out i have checked the timing again pins go straight back in only 3.4 volts at stop solenoid low pressure at injectors  are the cranksft sensor and cam sensor not talking to each other treid connecting the with ingition on and off could it be the imboliser any idea thanks colin

Submitted: 3 years ago.
Category: Ford