How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 3287
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

how do I connect jump leads from a 2007 focus c max to a flat

Resolved Question:

how do I connect jump leads from a 2007 focus c max to a flat battery on a Ka?
Submitted: 3 years ago.
Category: Ford
Expert:  Gallagher99 replied 3 years ago.
Hi there good morning to you
Ok firstly ensure both vehicles are turned off
Then connect the black lead to the negative terminaks the KA and the other end to the negative jump post stud at the passengers strut area behind engine fuse box of the c-max (as the negative terminal on the battery cAbt cmve accessed )
Then connect the red lead to both positive terminals of the KA and c-max
The turn the ignition on on good running vehicle for 30 seconds then start good running vehicle up and leave running while connected to flat vehicle for 3-5 minutes
Then crank /start the flat vehicle
This procedure ensures no voltage spikes to flat vehicle
If you need anymore help or advice on this issue please let me know
If you are completley satisfied with my answer /advice
PLEASE RATE MY ANSWER
Kind regards ***** ***** and have a nice day
Brian
Gallagher99 and other Ford Specialists are ready to help you