How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 3207
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

THE KEY TO OPEN THE BONNET TO MY FORD FOCUS DOES'NT WORK WHY

Resolved Question:

THE KEY TO OPEN THE BONNET TO MY FORD FOCUS DOES'NT WORK WHY COULD THIS BE?
Submitted: 2 years ago.
Category: Ford
Expert:  Gallagher99 replied 2 years ago.
there ,good afternoon to you
Sorry delayed response
Ok the fault lies with a broken bonnet release rod /clip assembly
This rod is Attached to the bonnet latch and activates the latch when the key is turned
The end part of the rod breaks between the rod and the latch
The first thing to try before going any further is to see if the bonnet opens if you push the key inward and attempt to open it and also using your fingers pull the bonnet upward so pressure is applied to the latch
This sometimes works
If you still cannot get the bonnet open then the ONLY way to access it open it is to remove the 2 x 10 mm volts from the bonnet latch from underneath the vehicle
This is tight on the focus /c-max depending on the engine Varient but manageable
Ok with the undershield dropped down remove the 4 x10 mm bolts that secure radiator bracket remove/drop the radiator downward this gives you more room to acess the latch bolts /crash panel
And using a light look upward and you will see the 2x10 mm bolts that hold the latch to the body
What you need to do remove these 2 bolts then using a suitable lever /screwdriver lever the latch out of its locating pegs and push the bonnet up
The bonnet will come up with the latch locked on to it
This is the only way of getting round this issue
This can be a tight job to do )removing the latch bolts as there is limited room
I personally use a ratchet spanner to remove them
Or a very small quarter drive ratchet and socket
Once removed the new part can be installed
This comes as a lock kit (you can just swap the old lock Into the new rod assembly
As building these lock kits to suit the key isn't straight forward
if you need anymore help or advice on this issue please let me know
if you are completley satisfied with my answer /advice PLEASE RATE MY ANSWER
kind regards ***** ***** and have a nice day
Brian
Gallagher99 and other Ford Specialists are ready to help you

Related Ford Questions