How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 3277
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

I have a 1.8 2010 focus (petrol) with big end bearing noise

Customer Question

Hi I have a 1.8 2010 focus (petrol) with big end bearing noise and after cap bolt setting plus any other info I might need thank you Adam.
Submitted: 2 years ago.
Category: Ford
Expert:  Gallagher99 replied 2 years ago.
Hi there Adam good morning to you
Ok is it the crankshaft bearings cap torque settings you are needing (bottom end knock )
As sonetimes it is more cost effective to fit a complete second hand engine
Regards Brian
Customer: replied 2 years ago.

that is correct bearing cap torque settings I need.

my customer just wants the bearings changed I have advised that.

Expert:  Gallagher99 replied 2 years ago.
Hi Adam sorry for the delay there
I was looking further into this for you and as I sysoexted ford don't supply bottom end shells etc for this duratec-he engine thus there is no repair procedure meaning there is no torque setting avaiable from ford as it only lists a short motor
This will be down to the fractured con rods setup
I don't know if any engineering shops would be able to supply shells for this engine but ford definitely don't supply them or replace them
If you need anymore help or advice on this issue Adam please let me know
If you are Completely satisfied with my answer /advice
PLEASE RATE MY ANSWER
Kind regards ***** ***** and have a nice day
Brian