How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 3206
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

I need AS built data explorer . We change old damage

Customer Question

I need AS built data for ford explorer .
We change old damage ECU vin 1fmeu63e28ua43663 by second hand used ECU vin 1fmeu7de4aua54989
Thanks advance
Submitted: 2 years ago.
Category: Ford
Expert:  Gallagher99 replied 2 years ago.
Hi there good afternoon to you and sorry for the delayed responseOk I have attached an image with the relavent PCM AS -built for Vin - 1mfeu63e28ua43663If you need anymore help or advice on this issue please let me know If you are Completely satisfied with my answer /advice PLEASE RATE MY ANSWER Kind regards ***** ***** and have a nice day Brian
Customer: replied 2 years ago.

Hi galla.

am not looking for this. May be misunderstand. I am looking for all modules. like abs module as built data. Because indecator light not off after engine run. And give me mismatch. So. I need all as built data for all modules please.

i used maxisys pro tools

Expert:  Gallagher99 replied 2 years ago.
Hi there sorry I thought it was only ecu as built you neededHere is the full As built for the required vin
Gallagher99 and other Ford Specialists are ready to help you
Customer: replied 2 years ago.

Yes. That what iam looking for.

thanksSmile galla

Customer: replied 2 years ago.

thanks galla

i try to program ABS MODULE.But i get code c2900 mismatch

when i check VIN #. its old one what you send it to me

please can you send all AS built data for VIN# ( 1FMEU7DE4AUA54898)

THANKS advance

Expert:  Gallagher99 replied 2 years ago.
Hi there here is the ASbuilt data you requested for vin 1FMEU7DE4AUA54898 Regards Brian
Customer: replied 2 years ago.

thanks galla

its work

thanks

Expert:  Gallagher99 replied 2 years ago.
Hi there
No worries if you ever need any future advice or technical help please let me know
Kind regards Brian
Customer: replied 2 years ago.

Hi galla

yes. i am satisfiy from your answer

but. i need from you some help about charging system.

alternator have three wires. one of them coming from pcm ( yellow color )

this wire no signal. shall you tel me what is the problem. is it from pcm?

can i solve it if its from pcm.

allready i check wire short or open.

thanks advance

Expert:  Gallagher99 replied 2 years ago.
Hi there ,good afternoon to you
Ok the 3 wires at the alternator are for the smart charge system
The PIN numbers /description changes depending on setup
But one is a 12volt feed
The other 2 are control and command wires
One is a command from the PCM
The other is the feedback from the alternator
I use an osilliscope set to VSS. Reading to monitor the signal
If you dissconnect the multiplug you will have one signal from. PCM
It's most commonly s poor signal from the alternator (the alternator can still charge
If you need anymore help or advice on this issue please let me know
If you are Completely satisfied with my answer /advice
PLEASE RATE MY ANSWER
Kind regards ***** ***** and have a nice day
Any postive feedback or bonuses are greatly appreciated
Brian

Related Ford Questions