How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gallagher99 Your Own Question
Gallagher99
Gallagher99, Senior Vehicle Technician
Category: Ford
Satisfied Customers: 3234
Experience:  SVQ LEVEL 3, QAULIFIED FORD SENIOR TECHNICIAN , ATA REGISTERD ,12 YEARS EXPERIENCE
17855046
Type Your Ford Question Here...
Gallagher99 is online now

Does anybody know the tightening torques in nM... for big

Customer Question

hi does anybody know the tightening torques in nM... for big end bearings and main bearings on a 62 reg ford focus 1.0 eco boost? ALSO FINDING IT HARD TO GET HOLD OF NEW SHELLS!!
Submitted: 10 months ago.
Category: Ford
Expert:  Gallagher99 replied 10 months ago.

Hi there good evening to you and sorry for the delayed response ,
My name is ***** ***** I would be happy to assist you tonight

Ok unfortunately you cannot purchase the big end shells separately you can only purchase a short motor /block assembly

This has been the case for many years with ford engines

This is why there isn't a torque setting avaiable

If you need anymore help or advice on this issue please let me know and I will do my upmost to assist you
If you are satisfied with my answer /advice
PLEASE REMEMBER TO RATE MY ANSWER
Kindest regards ***** ***** and have a nice evening

Brian

Expert:  Gallagher99 replied 8 months ago.

Hi there good afternoon to you

Was my information correct /successfull regarding bottom end issue

Regards ***** *****

Brian

Related Ford Questions