How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael Hannigan Your Own Question
Michael Hannigan
Michael Hannigan, Internet Researcher
Category: General
Satisfied Customers: 11884
Experience:  Extensive experience in research and problem solving.
23511658
Type Your Question Here...
Michael Hannigan is online now

Whirlpool AWO/D 4405 washer will not start. It worked fine

Customer Question

Whirlpool AWO/D 4405 washer will not start.
It worked fine one day next it would not even shoe a light.
I have checked the fuse and it is OK.
Submitted: 3 years ago.
Category: General
Expert:  Michael Hannigan replied 3 years ago.
There are a few things you can check to narrow this down.

Verify you have 120vac to connector P-16 pins 2 and 4. If you don't have power, then the power isn't getting past the main power. If you do, go to P-1 on the motor control board (left one), you should have 120vac across it's 2 terminals. If not it's probably the main board.

Any remote troubleshooting beyond that would be difficult, but the main board is the most likely cause.

Mike
Customer: replied 3 years ago.

Will bring a meter home tomorrow and check it out. Will let you know how I get on.


Cheers.

Expert:  Michael Hannigan replied 3 years ago.
Great. Just reply to me then and I will be notifed.

Mike