How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BuilderNorb Your Own Question
BuilderNorb
BuilderNorb, Architect
Category: Home Improvement
Satisfied Customers: 49
Experience:  20+ Years all aspects of construction.
70426509
Type Your Home Improvement Question Here...
BuilderNorb is online now

Why does our potterton combi boiler always jump to fault E133?

Customer Question

Why does our potterton combi boiler always jump to fault E133? The reason we found online was frozen pipes which does not apply as it is far to warm outside for that. Thank you for your help
Submitted: 3 years ago.
Category: Home Improvement
Expert:  BuilderNorb replied 3 years ago.
It means ignition lockout and will indicate faults with electrodes, gas valve,
condensate blockage, pcb, ignition transformer, gas supply fault and incorrect
co2 ratios. Try holding the reset button for five seconds. If you can re-set without it happening again then it should be fine,
otherwise it's a job for an engineer.
the only thing you can check yourself
is that the condensate pipe isn't blocked or frozen.

Related Home Improvement Questions