How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask KevinWhiteJA Your Own Question
KevinWhiteJA
KevinWhiteJA, Home Appliance Technician
Category: Home Improvement
Satisfied Customers: 996
Experience:  Worked on Appliances for more than 15 years
70193065
Type Your Home Improvement Question Here...
KevinWhiteJA is online now

We have a Viessman boiler feeding an underfloor system installed

Customer Question

We have a Viessman boiler feeding an underfloor system installed 2011 all find until now seems as if boiler pressure has dropped - what can I do?
Submitted: 3 years ago.
Category: Home Improvement
Expert:  KevinWhiteJA replied 3 years ago.

KevinWhiteJA :

Hi, welcome to Just answer

KevinWhiteJA :

Please tell me its complete model number

KevinWhiteJA :

and How old is it ?

JACUSTOMER-jaa2l1kf- :

Hi its a VITODENS 100-w-wb1b 35KW systems boiler heating controls by john Guest heating control screens linked to a Speedfit underfloor system. all installed in 2011.

KevinWhiteJA :

OK thanks

JACUSTOMER-jaa2l1kf- :

We are using JG TM4 heating control screens which now appear to switching off before hitting the temp level set. We have repeatedly reset the system using the instruction manual and in the same manner as for the last 2 years without issues

KevinWhiteJA :

ok

KevinWhiteJA :

Have you already tried to Pressurize the boiler and then isolate it by the ch valves under the boiler.

KevinWhiteJA :

The boiler must be isolated electrically and then you can open the valves to pressurize the boiler

JACUSTOMER-jaa2l1kf- :

No as not sure of steps to do this would appreciate further advice on this or is there a manual I should look at.

KevinWhiteJA :

The boiler must be isolated electrically and then you can open the valves to pressurize the boiler

KevinWhiteJA :

these valves are located under the boiler