Hi, welcome to Just answer
Please elaborate your problem...
how did it start ? why are you looking to reset the dishwasher controls ?
Hi i think the problem started when the cycle was interupted accidentily ,now when i select any program and close door all i hear is
what sounds like the drain pump running(no water going in)
OK and the water is still in there ?
No, but if i fill sump it drains staight away
OK, how old is it ?
Im guessing about 12-15 yrs
can you pull it out and clean the drain pump assembly completely...also lay it on its side and tilt it 45 degrees so that if there is any water in there it drains out completely....
Check this image this is the pressure switch..make sure there is no water near the switch and everything is dried up
Yes ,no prob , but its built in, may take a while.- is there afloat switch in assembly or something similar ?
yes it is located at the bottom near the drain pump assembly
after cleaning the problem should be solved
Ok kevin I will let u know asap ,thanks
If you have further questions I will be pleased to assist you – please use the REPLY link for further assistance..Please remember to RATE my answer Excellent or Good Service when you are satisfied....Thanks
Hi Kevin, laid machine over to 45 degrees ,some water ran out of bottom tray ,pressure switch looked ok though,tried wash program ok now ! I know problem will probably reoccur but hopefully it will be when we have better weather and i can turn it upside down outside.
You can also check for any possible leaks later...it should work now...You can get back to me if you need any assistance and I will help with no additional charges..
s there anything else I can assist you with today ?
really appreciate the help kevin ,many thanks.
You're welcome....Excellent feedback is appreciated if you are satisfied with my assistance....Have a Good Night